ll4001g thru ll4007g surface mount glass passivated rectifier reverse voltage - 50 to 1000 volts forward current -1.0ampere features mechanical data maximum ratings and electrical characteristics (ratings at 25 c ambient temperature unless otherwise specified ,single phase ,half wave 60hz,,resistive or inductive load. for capacitive load, derate by 20%.) plastic package has underwriters laboratory flammability classification 94v-0 construction utilizes void-free molded plastic technique for surface mounted applications high temperature soldering guaranteed:260 c/10 seconds at terminals component in accordance to rohs 2011 65 eu // note: 1.measured at 1mhz and applied reverse voltage of 4.0v dc. maximum recurrent peak reverse voltage 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 v rrm v olts v olts v olts v olts a mp a mps v rms v dc i (av) i fsm t/t j stg v f i r maximum rms voltage maximum dc blocking voltage maximum average forward rectified current maximum instantaneous forward voltage at 1.0 a typical thermal resistance typical junction capacitance(note 1) maximum reverse current at rated dc blocking voltage peak forward surge current (8.3ms half sine- wave superimposed on rated load (jedec method) 1.0 25.0 15 5.0 50.0 1.1 p f c j -55 to+150 75 30 operating and storage temperature range r semiconductor ll 4001g ll 4002g ll 4003g ll 4004g ll 4005g ll 4006g ll 4007g symbols units minimelf(do-213aa) dimensions in inches and (millimeters) minimelf(do-213aa) 0.144(3.65) 0.136(3.45) d2=d1 solderable ends 1st band +0 -0.008(0.203) d1= 0.067(1.7) 0.059(1.5) case: jedec mini melf(do-213aa) molded plastic body terminals: solder plated, solderable per mil-std-750,method 2026 polarity: color band denotes cathode end any weight: 0.0005ounce, 0.015 gram mounting position: 0.018(0.45) 0.010(0.25) jinan jingheng electronics co., ltd. http www.jinghenggroup.com :// 2-1 t =25 c a t =125 c a r ja r jl c a c/w c
ratings and characteristic curves ll4001g thru ll4007g 0.01 0.01 0.1 1.0 10 0.1 1 0 20 10 30 40 50 20 10 20 0 40 60 80 100 120 140 1 10 100 0.6 0.8 1.0 1.5 1.4 1.2 0 25 50 75 125 100 150 0 0.2 0.4 0.6 0.8 1.0 fig.1-forward current derating curve fig.3-maximum non-repetitive peak forward surge current fig.2-typical instantaneous forward characteristics fig.4-typical reverse characteristics average forwa rd curren t amperes () instantaneous forwa rd curren t( amperes) peak forward surge current(amperes) instantaneous forward voltage (volts) reverse voltage. (volts) percent of rated peak reverse voltage % number of cycles at 60hz ambient temperature ( c) 8.3ms single half sine-wave (jedec method) single phase half wave 60hz resistive or inductive load 1 0.1 1 10 100 10 100 fig.5-typical junction capacitance junction capacitance(pf) t =25 c j instantaneous reverse curren t( a) silicon rectifier jinan jingheng electronics co., ltd. http www.jinghenggroup.com :// 2-2 t =25 c pulse width=300 s 1% duty cycle j t =100 c j t =25 c j
|
